Intercooler Advice

[iflytii]

Found this on ebay. Dimensions are about 34x7x3.5". Auction is $285 buy it now + shipping. Looks decent but wanted to see what any of you turbo gurus thought before I potentially make a mistake. :D

http://i3.ebayimg.com/01/i/02/a8/d0/27_1.JPG

[iflytii]

More info from the seller:

This auction is for a BAR AND PLATE race intercooler. The core size of this intercooler is 24 X 6.5 X 3.5 The endtank to endtank size is 30X6.5X3.5 The overall size(including spouts) is 33.5x6.5x3.5. The inets are 2.5 inches in diameter. The endtank to endtank measurement is listed in the auction title as it's the most important when trying to fill the front mouth of your vehicle. This intercooler is rated for 585HP and less than 0.8psi. pressure drop @20psi. It's superior BAR AND PLATE design enables it to outperform much larger tube and fin intercoolers by as much as 35%. The endtanks are cast aluminum. The intercooler is 100% T.I.G. welded by our master welder (former ROLLS ROYCE chief welder!!!!) Absolute lowest pressure drop and high heat dissapation are the two most important design features that were considered when these cores were engineered. This is the best price anywhere for an american made intercooler of this quality.

[swartz]

if u have a stock bumper that might not fit.....u would def have to cut alot...3.5 is preety thick. if u relocate ur oil cooler and cut some stuff u should have room thickness wise

[iflytii]

if u have a stock bumper that might not fit.....u would def have to cut alot...3.5 is preety thick. if u relocate ur oil cooler and cut some stuff u should have room thickness wise

I have lot's of room and had planned on relocating the oil cooler...

http://img.photobucket.com/albums/v521/iflytii/e30firstautox.jpg

[swartz]

ahhh not a stock bumper sweet.that makes 2 of us

http://images.snapfish.com/342534%3A723232%7Ffp58%3Dot%3E232%3C%3D5%3B3%3D973 %3DXROQDF%3E23234%3C33%3A9894ot1lsi

[iflytii]

ahhh not a stock bumper sweet.that makes 2 of us

http://images.snapfish.com/342534%3A723232%7Ffp58%3Dot%3E232%3C%3D5%3B3%3D973 %3DXROQDF%3E23234%3C33%3A9894ot1lsi


Sweet! Is that a CF hood? I really need to get my fiberglass painted!!! We will nearly have twin cars! :D

[swartz]

yup carbon fiber
http://www.snapfish.com/slideshow/AlbumID=13188850/PictureID=235418699/t_=9290650

[Cephas]

ahhh not a stock bumper sweet.that makes 2 of us

http://images.snapfish.com/342534%3A723232%7Ffp58%3Dot%3E232%3C%3D5%3B3%3D973 %3DXROQDF%3E23234%3C33%3A9894ot1lsi


Holy fack...that thing doesn't run? Time to get that bad-boy back on the streets for sure. Nice car man. It looks great in your sig, but that pic is pure hotness :shock: