PDA

View Full Version : M20


Pages : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 [39]

  1. Used cam break in?
  2. Replacement for Mark D 19 lb. 7200 Chip
  3. Misfiring after rain, or extremely muggy night
  4. Late model cooling to heater core
  5. M20 twin turbo breaking heads. Please help
  6. Can't keep engine running
  7. Post-interference poor idle (not vac'); 'thoughts?
  8. Aftermarket fuel tank recommendation
  9. Head rebuild question.
  10. Quick help non running
  11. Seal HG oil leak externally?
  12. Replace the oil pump
  13. !!--Motronics Experts--!! Unsolvable ELECTRICAL misfire NIGHTMARE!
  14. Engine knocking sound
  15. Smog Mystery??? Failed miserably-Passed 600 Miles ago.
  16. M20 Coolant Temp and Water Temp Sensor DIY
  17. Radiator fan question...
  18. Teach me m20 performance
  19. Replaced 2 Crank Pos. Sensors in 1 Year? Starting to miss intermediate.
  20. M20 t-stat
  21. No power when starting
  22. m20 stock plug wires
  23. Coolant help...
  24. CNS / Eristatic head gasket ???
  25. stomp test
  26. Fpr
  27. M20 2.8 stroker questions
  28. Starting to lose power uphill
  29. M20 head question
  30. remove thermostat for troubleshooting
  31. 323i Catalytic Converter
  32. Thoughts on my oil analysis, ring and bearing wear
  33. LOTS of gas in intake, car running rich
  34. What is this motor doing?
  35. Stock M20- what are the best gaps for the various plugs?
  36. ecu
  37. Clearance between oil pump and pan baffle
  38. will the roller rocker arm from mini work in the M20?
  39. crankshaft axial play
  40. Replace Head Bolts?
  41. New engine has problems
  42. Lopey Idle After Timing Belt Change
  43. Engine noise, 220k mile motor dying?
  44. OBC / Code connundrum ('87 325is won't start)
  45. Tach signal for data logging.
  46. 87 325 is not starting. Electrical issue.
  47. To those who have cracked the #6 cam journal or head
  48. This one has me stumped
  49. I've got a real challenge for you guys!
  50. Hypothetical best possible setup on 87 octane
  51. O2 sensor aftermarket fitment
  52. Pictures/description of exhaust mounting for a non-kat
  53. Gremlin inside
  54. Fuel in my oil.
  55. M20B25 compression without opening the engine?